 |
Share to:
Full Dipped Oil Proof Red PVC Gloves
Anti-Static,
Oil Proof,
Water Proof,
Chemical Resistant
Oil Proof,
Water Proof,
Chemical Resistant
| Quantity: | |
|---|---|
-
HPV904
-
HANGZHOU HEMAI
-
35cm
-
100% cotton lining
-
smooth pvc dipping
-
open cuff
Full Dipped Oil Proof gloves Red PVC gloves Safety Work Glove
Red PVC fullly dipped Safety Gloves,
Gauntlet protective glove, smooth finished
100% cotton/interlock lining.
size: 27-28cm, 30cm,
MOQ: 1000dozen,
Packing: one pair/polybag, 100pairs/carton.
Carton szie: 35*30*58cm.
Loading Quantity: 450ctns in a 20ft container.
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
Protective gloves against chemicals and micro-organisms
BS EN374
This pictogram is displayed on gloves that comply to penetration and permeation requirements. Gloves that carry this symbol have been successfully tested against at least 3 different chemicals. The pictogram is accompanied by the relevant code letter(s) of these chemicals according to the following chart:
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
Red PVC fullly dipped Safety Gloves,
Gauntlet protective glove, smooth finished
100% cotton/interlock lining.
size: 27-28cm, 30cm,
MOQ: 1000dozen,
Packing: one pair/polybag, 100pairs/carton.
Carton szie: 35*30*58cm.
Loading Quantity: 450ctns in a 20ft container.
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
Protective gloves against chemicals and micro-organisms
BS EN374
This pictogram is displayed on gloves that comply to penetration and permeation requirements. Gloves that carry this symbol have been successfully tested against at least 3 different chemicals. The pictogram is accompanied by the relevant code letter(s) of these chemicals according to the following chart:
| Code letter | Class |
| A | Primary alcohol |
| B | Ketone |
| C | Nitrile compound |
| D | Chlorinated paraffin |
| E | Sulphur containing organic compound |
| F | Aromatic hydrocarbon |
| G | Amine |
| H | Heterocyclic and ether compound |
| I | Ester |
| J | Saturated hydrocarbon |
| K | Inorganic base |
| L | Inorganic mineral acid |
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
Full Dipped Oil Proof gloves Red PVC gloves Safety Work Glove
Red PVC fullly dipped Safety Gloves,
Gauntlet protective glove, smooth finished
100% cotton/interlock lining.
size: 27-28cm, 30cm,
MOQ: 1000dozen,
Packing: one pair/polybag, 100pairs/carton.
Carton szie: 35*30*58cm.
Loading Quantity: 450ctns in a 20ft container.
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
Protective gloves against chemicals and micro-organisms
BS EN374
This pictogram is displayed on gloves that comply to penetration and permeation requirements. Gloves that carry this symbol have been successfully tested against at least 3 different chemicals. The pictogram is accompanied by the relevant code letter(s) of these chemicals according to the following chart:
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
Red PVC fullly dipped Safety Gloves,
Gauntlet protective glove, smooth finished
100% cotton/interlock lining.
size: 27-28cm, 30cm,
MOQ: 1000dozen,
Packing: one pair/polybag, 100pairs/carton.
Carton szie: 35*30*58cm.
Loading Quantity: 450ctns in a 20ft container.
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
Protective gloves against chemicals and micro-organisms
BS EN374
This pictogram is displayed on gloves that comply to penetration and permeation requirements. Gloves that carry this symbol have been successfully tested against at least 3 different chemicals. The pictogram is accompanied by the relevant code letter(s) of these chemicals according to the following chart:
| Code letter | Class |
| A | Primary alcohol |
| B | Ketone |
| C | Nitrile compound |
| D | Chlorinated paraffin |
| E | Sulphur containing organic compound |
| F | Aromatic hydrocarbon |
| G | Amine |
| H | Heterocyclic and ether compound |
| I | Ester |
| J | Saturated hydrocarbon |
| K | Inorganic base |
| L | Inorganic mineral acid |
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
