 |
Share to:
Anti Cut Gloves TPR Impact Resistant Glove Mechanic Safety Glove
HPPE fiber mix glass fiber offer perfect cut resistant glove
Reinforced pad inside glove gives nice impact
Reinforcement between thumb and fore finger
TPR chips on back of hand
Reinforced pad inside glove gives nice impact
Reinforcement between thumb and fore finger
TPR chips on back of hand
| Quantity: | |
|---|---|
- HCR305
- HEMAI SAFETY or OEM
- 61161000
- Sandy nitrile grip coating
- TPR
Anti Cut gloves TPR Impact Resistant gloves protective Mechanic work glove
13 gauge black nylon & HPPE and white glassfibre
Palm coated black nitrile
TPR chips on back,
Anti-impact, anti- Cut 5
Feature
Elasticated cuff
Good grip in wet enviroment
Strong abrasion performance
Sandy finish over entire surface
EN388 4543
Breathable on back
Seamless knit
EN388 Mechanical risks :
The standard states gloves protective function against phycisal harm and mechanical risks, includeing Abrasion resistance, blade cut resistance, tear resistance, and puncture resistance.
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
13 gauge black nylon & HPPE and white glassfibre
Palm coated black nitrile
TPR chips on back,
Anti-impact, anti- Cut 5
Feature
Elasticated cuff
Good grip in wet enviroment
Strong abrasion performance
Sandy finish over entire surface
EN388 4543
Breathable on back
Seamless knit
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
| Size # | size | Hand circumference (mm) | Hand length (mm) | Length of glove (mm) |
| 6 | XS | 152 | 160 | 220 |
| 7 | S | 178 | 171 | 30 |
| 8 | M | 203 | 182 | 240 |
| 9 | L | 229 | 192 | 250 |
| 10 | XL | 254 | 204 | 260 |
| 11 | XXL | 279 | 215 | 270 |
EN388 Mechanical risks :
The standard states gloves protective function against phycisal harm and mechanical risks, includeing Abrasion resistance, blade cut resistance, tear resistance, and puncture resistance.
| Character | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
| Abrasion resistance (number of cycle) | 100 | 500 | 2000 | 8000 | ---- |
| Blace cut resistance ( Index ) | 1.2 | 2.5 | 5 | 10 | 20 |
| Tear resistance | 10 | 25 | 50 | 75 | --- |
| Puncture resistance | 20 | 60 | 100 | 150 | --- |
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
Anti Cut gloves TPR Impact Resistant gloves protective Mechanic work glove
13 gauge black nylon & HPPE and white glassfibre
Palm coated black nitrile
TPR chips on back,
Anti-impact, anti- Cut 5
Feature
Elasticated cuff
Good grip in wet enviroment
Strong abrasion performance
Sandy finish over entire surface
EN388 4543
Breathable on back
Seamless knit
EN388 Mechanical risks :
The standard states gloves protective function against phycisal harm and mechanical risks, includeing Abrasion resistance, blade cut resistance, tear resistance, and puncture resistance.
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
13 gauge black nylon & HPPE and white glassfibre
Palm coated black nitrile
TPR chips on back,
Anti-impact, anti- Cut 5
Feature
Elasticated cuff
Good grip in wet enviroment
Strong abrasion performance
Sandy finish over entire surface
EN388 4543
Breathable on back
Seamless knit
Application:
Oil industry, mechanical, chemical industry, Mining industry and heavy industry, metal industry, general work,Maintenance, Construction, Engineering, Plumbing, Assembly Industry, Automotive Manufacturing, Packaging, Electronics, Glass Industry etc.
Our Services
1).OEM :available
2).logo :design as customers' requested
3).sample fee :free of charge
4).sample time :1-7 days
| Size # | size | Hand circumference (mm) | Hand length (mm) | Length of glove (mm) |
| 6 | XS | 152 | 160 | 220 |
| 7 | S | 178 | 171 | 30 |
| 8 | M | 203 | 182 | 240 |
| 9 | L | 229 | 192 | 250 |
| 10 | XL | 254 | 204 | 260 |
| 11 | XXL | 279 | 215 | 270 |
EN388 Mechanical risks :
The standard states gloves protective function against phycisal harm and mechanical risks, includeing Abrasion resistance, blade cut resistance, tear resistance, and puncture resistance.
| Character | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 |
| Abrasion resistance (number of cycle) | 100 | 500 | 2000 | 8000 | ---- |
| Blace cut resistance ( Index ) | 1.2 | 2.5 | 5 | 10 | 20 |
| Tear resistance | 10 | 25 | 50 | 75 | --- |
| Puncture resistance | 20 | 60 | 100 | 150 | --- |
FAQ
1) Are you a factory or trading company ?
We are a factory.
2) Where is your factory located ? How can I visit there ?
We have 2 factories for different products range. We warmly welcome you visit us. You can go there directly or guide by us.
3) Do you have CE certifixate of your products ?
We are cooperating with CTC and TUV test labs, most our gloves comply with CE certificate ( EN420, E388, EN511, EN407 )
4) How can I get a sample ?
We would like to send free samples to you.
5) How does your factory do to control quality ?
Quality is priority. HEMAI people always pay extra cost and attention to quality controlling from the very beginning to the very end. All the products will be inspected carefully in 3 times at least before shipment by our QC
6) Warranty
For all of our standard quality gloves, if there is any products below grade, we promise to give compensation or we will accept return if you want to return the cargos.
